# Configure Slot

Source: https://help.malighting.com/dot2/en/help/key_window_configureslot.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
To open the configure slot window, tap at the slot you want to configure, e.g. B-wing 1, in the [Wings window](/dot2/key_window_wings/).

![](/img/dot2/dot2_viewsandwindows_configureslot01_1-0-1b6c79.png)

In this window, you can assign wings to a slot or clear the assignment.

The title bar displays the selected slot.

**Available devices**:\
Displays all available wings, depending on the selected slot.\
A selected device is displayed with an orange bar on the left side of the device.

If a wing is selected in the configure slots window, the buttons on the wing starts to flash.

A button wing or fader wing can have three different status:

1\. The wing is displayed without any additional sign.\
The wing is connected to the console and is free to assign.

![](/img/dot2/dot2_viewsandwindows_configureslot02_1-0-a5e91f.png)

2\. The wing is displayed with a green tickmark.\
The wing is connected to the console and assigned to a slot.\
The assigned slot is written in brackets.

![](/img/dot2/dot2_viewsandwindows_configureslot03_1-0-81a0e2.png)

3\. The wing is displayed with a red prohibition sign.\
The wing is connected to another console and not available.

To assign a wing with a prohibition sign, you need to disconnect the wing on the respective console first.

![](/img/dot2/dot2_viewsandwindows_configureslot04_1-0-0a756e.png)

**Assign selected:**\
Tap to assign the selected device to the slot. The Configure Slot window close and you are back in the [Wings window](/dot2/key_window_wings/).

**Disconnect device:**\
Tap to disconnect the device from the slot.

## Related Links

- [Wings Window](/dot2/key_window_wings/)
- [How to connect Nodes, Wings and dot2 onPC?](/dot2/key_ht_wingsnodes3donpc/)